Skip to content
Business

Denmark’s Robotics Map: 16 Suppliers from Odense to Aalborg

20.11.2026 · Redakcja RoboMorrow
Universal Robots stand with a demonstration arm at the R-24 robotics fair in Odense in 2024.

Universal Robots stand, R-24, Odense, 13 March 2024. Toxophilus · CC BY-SA 4.0. Cropped and converted to WebP.

ROBOMORROW INTELLIGENCE / 06 · DENMARK · Redakcja RoboMorrow

In Denmark, the maker of a robot arm, a gripper supplier and the developer of welding software can all be based in the same city. Each supplies a different part of a job that the customer ultimately counts in finished pallets, accepted welds or staff hours recovered on a shift. Our map of 16 suppliers and brands traces those boundaries.

Denmark in three numbers

  • 8 of the 16 selected suppliers give an address on Funen.
  • EUR 4.8bn in 2024 turnover for the robotics, automation and drone sector.
  • EUR 2.6bn in exports for the same sector and year.
Contents

What is clustered around Odense?

Eight of the sixteen suppliers in our selection list an address on Funen. Seven list Odense, while ROEQ gives Vissenbjerg. Several distinct parts of a workcell sit in that group. Universal Robots offers an arm, OnRobot a gripper, Smooth Robotics welding programming tools and Nordbo Robotics a way to teach motion by demonstration. Counting each offering as another machine would overstate what arrived on the factory floor.

The map branches in two directions beyond Funen. In the west, Vejen is home to the FD20 field robot supplier and Aalborg to the maker of the ROBERT rehabilitation system. The Copenhagen area brings together a seven-axis arm from Kassow Robots, pallet transport from Robotize and a construction printer from COBOD. A map point locates the supplier. A customer using its equipment may be in another country.

Map of 16 suppliers and brands in Denmark, with featured products and cities.
Map of 16 suppliers and brands in Denmark, with featured products and cities. Open full size

How much does the sector export, and what is counted?

Odense Robotics reports EUR 4.8 billion in turnover and EUR 2.6 billion in exports for Denmark’s robotics, automation and drone industry in 2024. The organisation published the figures on 20 April 2026. Turnover grew by 4.4% year on year and exports by about 8%. Dividing the two rounded amounts gives roughly 54 cents of exports for each euro of turnover.

This statistic measures sales across a broad industry. It cannot establish how many arms were installed, how much revenue came from robots alone or what share accrued to the suppliers profiled here. A gripper exporter and a vehicle manufacturer sell different parts of an investment. Dividing national turnover by the number of selected brands would say little about either business.

Odense Robotics · Insight Report 2026

Danish robotics, automation and drone sector turnover and exports in 2024.
Danish robotics, automation and drone sector turnover and exports in 2024. Open full size

Where does an arm end and a workcell begin?

For a UR20 palletising cell, the revealing carton is the last one on the top layer. Can the arm reach that corner with the tool installed? Will the carton keep its shape when the packaging supplier changes? The arm specification is a starting point. An acceptance trial should include the pallet pattern, representative loads and a shift’s output including interruptions in material supply.

Welding calls for a different measure. SmoothTool lets a welder teach a joint path. The most informative point to test easier programming is a changeover, from the last accepted part in the old run to the first accepted part in the new one. Fixture setup, path teaching and rework all belong in the interval.

Four sectors and the number of brands selected in each.
Four sectors and the number of brands selected in each. Open full size

Who takes the pallet when the trip ends?

On a shop floor, the MiR250 base, a ROEQ cart module and the ER-FLEX mobile manipulator address three different problems. A base makes the journey. A suitable module can couple a cart, deliver it and leave it at a workstation. An arm on a mobile base can also pick up or set down an item. Before selecting equipment, establish how the worker or machine needs to receive the material.

In pallet transport the job often ends after the robot stops moving. An occupied bay can hold up the next deliveries even after an uneventful trip. A comparison of Global AGV and GoPal systems should count deliveries accepted on time and minutes spent waiting for handover. A speed ranking would be misleading without a common route, pallet mix and shift workload.

Mobile robots and a pallet on the MiR stand at R-24.
MiR stand, R-24, Odense, 14 March 2024. Toxophilus · CC BY-SA 4.0. Resized and converted to WebP.

FarmDroid FD20: weeding starts at sowing

On a sugar beet field, the robot makes its most important measurement before the first weed appears. FD20 records seed coordinates as it sows. On a subsequent pass, the weeding system uses that record to work around the crop. FarmDroid says this also permits mechanical weeding before emergence, when there are no crop leaves for a camera to identify.

In 2020 the Swiss research institute FiBL documented Daniel and David Vetterli’s first experience sowing sugar beet with the machine. The growers liked the operating principle but reported too many interruptions and too much supervision. Their account concerns that season and that equipment. It cannot establish the present cost of weeding or the payback period on another farm.

A useful comparison for a grower would be a log for two comparable fields. Alongside area and crop condition, record supervision, trips to a stopped machine and manual touch-up separately. The log reveals how much of the work transferred to the robot returns to the grower in a different form.

FarmDroid FD20 · FiBL / Organic Eprints

FiBL, 2020. Sowing and in-row weeding in Swiss sugar beet. Watch the source film
Manufacturer footage. FarmDroid FD20 sowing and weeding chicory. Watch the FarmDroid film
FD20 seed coordinate recording, weeding and the work of supervision.
FD20 seed coordinate recording, weeding and the work of supervision. Open full size

From waterfront inspection to a therapy session

Sentinus brings back underwater imagery. A useful inspection result is a record from which another inspector can locate the relevant part of a structure. Likewise, a Capra Scout round has value when its sensor captures a required checkpoint. One acceptance exercise for either system is to select a feature and ask a second person to locate it using the recorded material.

In Aalborg, Life Science Robotics offers ROBERT for assisted exercise. A facility needs to account for patient and station setup and staff time after the session. The product page establishes the device’s intended use. Assessing treatment effectiveness for a specific patient group requires separate clinical evidence.

Four measures for assessing pilots in different working environments.
Four measures for assessing pilots in different working environments. Open full size

Supplier and product directory

This editorial selection covers 16 suppliers or brands with a documented address in Denmark and a named product. Each brand appears once, under its featured application. Brands with a common corporate owner can have separate entries. Counts describe this selection only.

16 / 16 suppliers and brands

Manufacturing

Universal Robots

Odense

UR20

A collaborative arm reaches cartons in a palletising cell. Pallet placement, the gripper and carton weight determine the usable workspace.

Product · Location
Manufacturing

OnRobot

Odense

2FG7

An electric parallel gripper holds a part between two fingers. Jaw selection depends on the geometry of the workpiece.

Product · Location
Manufacturing

Nordbo Robotics

Odense

Mimic

An operator demonstrates a tool motion. The platform translates it into robot motion for work on parts with complex shapes.

Product · Location
Manufacturing

Smooth Robotics

Odense

SmoothTool

A welder teaches the joint path on a UR arm. The software stores it so the cell can repeat the path on subsequent parts.

Product · Location
Manufacturing

Kassow Robots

Kastrup

KR Series

A seven-axis arm gives the integrator another way to orient the arm when reaching a tool or tending a machine.

Product · Location
Intralogistics

Mobile Industrial Robots

Odense

MiR250

A mobile base moves loads between points on a shop floor. The top module and receiving station determine how material leaves the robot.

Product · Location
Intralogistics

ROEQ

Vissenbjerg

Cart modules

A top module couples a mobile robot to a cart. A batch can stay at the workstation while the base takes its next assignment.

Product · Location
Intralogistics

Enabled Robotics

Odense

ER-FLEX

An arm travels on a mobile base to pick or place an item at a station. Docking and grasp accuracy need testing in the same cycle.

Product · Location
Intralogistics

BILA

Nykøbing Mors

Global AGV

An automated forklift transports pallets. Acceptance depends on the pallet type, drop-off position and traffic rules on the floor.

Product · Location
Intralogistics

Robotize

Kgs. Lyngby

GoPal

A family of mobile robots handles pallet transport. Capacity planning starts with the number of pallets ready for collection at peak times.

Product · Location
Field & infrastructure

FarmDroid

Vejen

FD20

The robot records seed positions during sowing and reuses the coordinates for mechanical weeding between plants.

Product · Location
Field & infrastructure

Capra Robotics

Viby J

Capra Scout

A mobile inspection platform carries sensors along a route. The value of a round depends in part on whether the required checkpoints were recorded.

Product · Location
Field & infrastructure

TinyMobileRobots

Malling

TinyLineMarker Pro X

A robot paints sports-field lines from a layout. For a groundskeeper, setup on the next pitch and corrections at the boundary both matter.

Product · Location
Field & infrastructure

Blue Atlas Robotics

Odense

Sentinus

A remotely operated underwater vehicle collects inspection imagery. An operator interprets the footage and can revisit an area that needs a closer look.

Product · Location
Field & infrastructure

COBOD

Copenhagen

BOD2

A gantry construction printer deposits material in layers on site. Mix preparation and subsequent finishing are separate stages.

Product · Location
Rehabilitation

Life Science Robotics

Aalborg

ROBERT®

The system assists lower-limb exercises. The clinical team is responsible for patient selection, session setup and supervision.

Product · Location

More from the atlas

Compare the division of labour in warehouses with the Japan edition, and the supplier mix with the China edition. Japan’s robotics map · China’s robotics map

Sources and methodology

Publications and product pages. The first two dates indicate publication, subsequent dates indicate access. Location references appear in the directory.

  1. Odense Robotics · Robotics industry explores new paths in a challenging market · 2026-04-20
  2. FiBL · Experience with the Farmdroid FD20 field robot: Sowing and in-row weeding of sugar beet · 2020
  3. Universal Robots · UR20 · 2026-11-20
  4. OnRobot · 2FG7 · 2026-11-20
  5. Nordbo Robotics · Mimic · 2026-11-20
  6. Smooth Robotics · SmoothTool · 2026-11-20
  7. Kassow Robots · KR Series · 2026-11-20
  8. Mobile Industrial Robots · MiR250 · 2026-11-20
  9. ROEQ · Cart modules · 2026-11-20
  10. Enabled Robotics · ER-FLEX · 2026-11-20
  11. BILA · Global AGV · 2026-11-20
  12. Robotize · GoPal · 2026-11-20
  13. FarmDroid · FD20 · 2026-11-20
  14. Capra Robotics · Capra Scout · 2026-11-20
  15. TinyMobileRobots · TinyLineMarker Pro X · 2026-11-20
  16. Blue Atlas Robotics · Sentinus · 2026-11-20
  17. COBOD · BOD2 · 2026-11-20
  18. Life Science Robotics · ROBERT® · 2026-11-20
Search robots
RoboMorrow Sverige · Svenska →