RoboMorrow · Decision Lab
Check furniture clearance, thresholds and the dock in one place. Every result explains its conditions; it is not a cleaning-performance guarantee.
Enter measurements. You can browse the source data below before calculating.
The 88 mm figure is a two-step 45 + 43 mm arrangement under manufacturer conditions; body height is 79.8 mm. The listed body height is 79.8 mm. The advertised 79.5 mm entry relies on limited component compression; the manufacturer warns that scraping may occur. We do not use that lower figure for planning. The plumbed dock is shorter but has separate installation requirements.
Open model profile →The 88 mm claim applies to a 45 + 43 mm two-step threshold, not one vertical edge.
The combined 88 mm requires a two-step geometry matching the manufacturer test conditions.
79.8 mm with LDS retracted and 93.5 mm raised. The 40 mm threshold is a 30 + 10 mm arrangement.
Open model profile →The manufacturer specifies up to 40 mm for a double-layer threshold and no separate single-edge figure. Identify the dock first: the standard unit is 488 mm high; Refill & Drainage is 300 mm. A shorter enclosure does not make the variants interchangeable. We use the global product specification, not the inconsistent inch-based robot dimensions in the Polish shop table.
Open model profile →The 40 mm claim is for a double-layer threshold; the mechanical arm does not change the published robot dimensions. Body dimensions do not describe the working envelope of the deployed arm. The selector checks travel clearance, not whether manipulation is possible under furniture. Check supported objects, the arm working area and manual restrictions separately.
Open model profile →79.5 mm with the VersaLift sensor retracted and 103 mm raised; 88 mm applies to a two-step obstacle.
89 mm with VersaLift retracted and 111 mm raised; maker figures are 42 mm single and 60 mm over two steps. 89 mm applies with VersaLift retracted; with the sensor raised the height is 111 mm. A space that only accommodates the lowered mode remains conditional. The tall dock also needs room for tank removal, which its enclosure height does not specify.
Open model profile →Dock dimensions include the base. The 24 mm figure is for one threshold; 40 mm is stated for staged thresholds and tracks. The manufacturer distinguishes dock depth without the base (335 mm) from depth including it (493 mm). Our floor footprint uses the complete base. Do not transfer these dimensions to another X11 dock. The bagless container still needs access for emptying.
Open model profile →The manufacturer states obstacle clearance up to 20 mm. Dock dimensions include the base. The exact model page is confirmed, but the retrieved source does not supply a complete dimensions table. We do not borrow X8 or X11 measurements. Until a manual or manufacturer confirmation is available, the selector does not decide fit or provide a dock template.
Open model profile →Official material confirms a 3.86-inch (about 98 mm) body and about 20 mm threshold; other dimensions remain blank without a source.
Dimensions come from Narwal’s comparison table; a separate support article states total obstacle crossing up to 40 mm.
Open model profile →Not the Freo Z10 Ultra. Narwal’s support article lists the standard obstacle limit as 20 mm.
Open model profile →The product page states obstacle crossing up to 4 cm without a separate single vertical-edge limit.
Open model profile →Dimensions follow Narwal’s L × W × H table; the standard published obstacle clearance is 20 mm.
Dimensions and the 20 mm limit come from official Narwal support materials.
This is a compact charging dock, not a full wash-and-empty station. Narwal lists the standard 20 mm threshold.
Official support confirms E25/E28 dimensions; no threshold limit is assigned without an explicit maker specification. The Polish product table and EU comparison on the E28 page give different E25 dimensions. That is not a sound basis for a close-fitting recess template. We withhold geometry calculations and the PDF instead of choosing a convenient number. Ask for the complete dock dimensions of the exact SKU.
Open model profile →E28 uses the same robot body as E25 but a larger station. Threshold clearance remains blank without an official number.
Distinguish 79.5 mm with the sensor retracted from 102.8 mm when raised. The advertised 8.8 cm double-step figure does not mean an 8.8 cm vertical single step. Measure the threshold profile and spacing, not just its total height.
Open model profile →Height changes from 97.5 to 120 mm with sensor position. Do not substitute the Track variant or Aqua10 Roller without Ultra. Beyond dimensions, check access to the roller and water channels. Roller lifting is not a guarantee that every carpet stays dry.
Open model profile →The EU specification lists a 371.5 × 484 × 440 mm dock, while the comparison lists 14.63 × 19.06 × 18.28 inches, implying a different height. We cannot establish whether this is an accessory, variant or table error. The model stays in the catalogue with geometry calculations explicitly withheld.
Open model profile →Dimensions are from the manufacturer’s US product page. They do not prove electrical compatibility, warranty coverage or an identical European bundle. The template identifies that market. Obtain exact-variant confirmation before commissioning cabinetry for a Polish purchase.
Open model profile →The German specification lists 96 mm with DToF lowered and 119.6 mm with it raised. Dock enclosure dimensions are 433 × 420 × 470 mm. We do not turn a maximum obstacle claim into a guarantee for an unknown threshold. Check access for roller and tank maintenance too.
Open model profile →Fits dimensionally means the entered measurements match, not that the product was tested. Conditional requires a further check. Rejected identifies a mismatch or unsafe setup. Missing data is not a pass. A two-step claim never becomes a single-edge limit.
Redakcja RoboMorrow · release 17 Oct 2026. Source dates are listed separately. Measurements and results stay in your browser; saving downloads a file to your device.