KEENON KLEENBOT C40

KEENON KLEENBOT C40 is a professional 4-in-1 robot focused on combining dry and wet cleaning with relatively easy routine servicing. KEENON highlights its triple-brush structure, battery swapping, app/web management and building-integration options.

Key specifications

• 578 × 500 × 690 mm without squeegee; 616 × 550 × 690 mm with squeegee.
• 70 kg.
• 2 h charging and quick battery replacement.
• Up to 5 h scrubbing and 12 h sweeping stated by KEENON.
• 560 mm sweeping width; 400 mm vacuum/scrub width.
• 16 L clean and 14 L waste-water tanks; 8 L dust bag.
• Up to 1100 m²/h stated cleaning efficiency.
• 23,500 Pa maximum stated suction within the system.

Triple-brush system

KEENON describes a layout designed to separate dry and wet waste: the front section handles dry debris and the rear performs wet cleaning. This can be attractive in retail and food-service environments, but separation quality and the finish left on the floor should be tested with real site contamination.

Servicing and uptime

C40 strongly emphasises modular maintenance. KEENON claims roughly 35 seconds of daily care and a five-second battery swap. These are not RoboMorrow measurements, but a rapid battery change may be useful in staffed multi-shift operations. For unattended night work, a docking/workstation solution may matter more.

Navigation and management

The sensing package includes LiDAR, dual stereo vision, four line lasers and three ultrasonic modules. App/web management, reports and fleet functions are supported. KEENON also advertises door and lift integration; verify compatibility with the exact building system.

Related

Best commercial cleaning robots →

Official source

KEENON KLEENBOT C40